设为首页 | 收藏本页
登陆您的帐号 | 免费注册帐号
全部栏目 > 公司企业 > 机械/设备
下一篇上一篇 首页图文展示(无图)

琅菱NT-X6碎王涡轮式大量循环型粉碎机

发布人:longly
发布日期:2011-06-09 00:00:00
刷新日期:2011-06-09 14:11:53
回复或评论:0
阅览:933
NT-X6碎王涡轮式大量循环型粉碎机  高性能 高质量 高效率   碎王磨碎机,在短的简形粉碎部内部,装有撕拌用的转子和装在其外周的隔离板构成。转子旋转产生离心力,磨介球向隔离移动并受到层状挤压,同时由于转子的旋转运动,磨介球之间产生强大的剪切力,由于离心力与料奖的流动方向一致,导致均匀的粉碎,分散且使大量料浆能从隔离板顺利的排出。   应用: 打印机油墨 印刷油墨 PZT的分散 钛酸钡  软硬铁氧化的分散,粉碎,氧化铝的粉碎,氧化锆的分散 炭酸 催化剂的粉碎 硅砂   高性能: 抑制能量损失,实现顺畅大量循环处理          碎王NT-W3为料浆流动方向与转子离心力方向一致的新型粉碎机,由于离心,料浆向着装在转子外周部位的隔板顺畅流动,使用小料径磨介球对料奖进行均匀分配,粉碎,减轻粉碎部分局部发热,稳定地进行大量循环处理。发挥强大的粉碎力,有效地利用小粒径磨介球及离心力,粉碎力,大大提高分散能力。 高质量: 确保质量稳定,由于大量循环处理,确保粒径分布窄和质量稳定。有效利用能量提升磨介球效率,大度降低磨介球磨耗粉混入。 高效率: 能量利用率高,由于磨介球运动均匀,效率高,运行成本低。 磨介珠的无效运动不存在,有效利用能量进行粉碎,能量效率高,电力消耗低。 工费大大降低由于是循环处理,定时装置使无人操作可能,人工费大大降低。 加物料的添加分散容易,在处理过程中进行经过确认后可以任意随时填加添加物。   NT-X6 King of crush---Turbo type bead mill High Performance   High Quality   High Efficiency   Crusher King, turbo type bead mill, equipped with a short crush chamber. In the inner of chamber, a stator used for mix and some isolated plates around the stator are equipped. Centrifugal power supported by the rotation of stator, that’s make the grinding media move to isolated plates and being extruded with big pressure from the plates. At the same time, high speed rotation of stator give the grinding media high impact and shear energy, add to the centrifugal power and materials move direction are the same, all these ensure the products can be evenly crushed and stirred.   Application: Stamping inks, Printing inks, PZT mixingCalcium carbonateOxide iron, Oxide aluminum, Paints, Coatings etc. High performance: Reduce energy, can continuously process large mass materials. NT-X6 is a kind of machine that the centrifugal power and materials moving direction are consistency, they both flow to the isolated plate make the grinding media distribute evenly in the chamber. The energy of beads can be complete used and also avoid the high temperature of chamber part, stable and recycle process can use the centrifugal power and bead energy effectively to enhance the effect of crush and dispersion. High quality: For ensure machine can continue recycle working, very small size beads with high strength kinetic energy and high quality chamber should be determined first, to ensure enhance the energy use and cut down the fragments of beads while grinding. High efficiency: Grinding media in the chamber with high speed and uniform movement, non-working movement is not existent. The kinetic energy is completely used to enhance dispersion and grinding. It’s very high efficiency can reducing cost.  1. Reduce electric power, low cost while working; 2. Reduce labor, fixed time device make without labor operation come true due to machine’s recycle working principle; 3. Easy to add materials while processing, you can add materials into chamber after confirm. Technical Parameter
Model Chamber VolumeL Motor PowerKW Weightkg Media Sizemm Dimension (mm)
NT-X3 3 75 800 0.1-2.0 1150*800*1450
NT-X6 6 15 880 0.1-2.0 1200*850*1500
 
评论(0) 暂无回帖


打印 收藏 关闭窗口 下一篇上一篇